Leistritz offers economical and easy to install 2 to 3 stop alternatives.

The twin light is a 2-stop, 2500 lbs. holeless elevator, whereas the standard package is in-ground with up to 5000 lbs. capacity. Twin telescopic is our holeless product for up to 5000 lbs. When 3 openings are required the cantilevered telescopic or cantilevered roped elevator offers the best solution.

The development of Emarelle the counterweight-roped hydro has given architects and installers a very attractive hydraulic elevator. Thanks to the counterweight the size of the hydraulic system is significantly reduced, with a small power unit suitable for MRL installation. The pulling cylinder, micro leveling and electronic valve option are features that make the Emarelle ride quality comparable to any low-rise traction elevator. Speed goes up to 200 FPM and capacity to 4000 lbs. The reaction load is supported by the pit floor and simple installation with pre-engineered elements for fast and trouble-free installation.

Another more conventional alternative is the cantilevered roped elevator, which is holeless whereas the cantilever telescopic and twin telescopic are holeless up to 40 ft. of travel.

The dual roped elevator has application both as a passenger and a freight elevator. It can be equipped with standard freight or passenger doors and cabs and with custom sized platforms. The sheave assemblies are running off the supported and running off the main guide rails eliminating the need for auxiliary guide rails.

The freight elevator package is rated for Class A through Class C loading and can either be equipped with twin pistons or center piston below car. Standard capacity is up to 10,000 lbs., however custom freight elevator for up to 60,000 lbs. has been designed and delivered.

The modern Leistritz power units are built with the best motors, valve and pumps in the market. The standard submerged unit is known for low pulsation and quiet operation.

With the LTPA Models, Leistritz has reduced the heat generation by moving the motor outside the oil, however still keeping the simplicity and ease of service of the submersible unit. There is no belt or sheaves or a risk of leaks from tanks or pumps. The motor is simply vertical driving the pump inside the tank. With the power unit we also offer as options the micro-leveling device and the electronic valve. The power unit can be offered separate to modernization projects or as part of the complete Leistritz package.